Exhibition

Home > Exhibition > Content
The advantages and composition of continuous flow shot blast machines
Jun 25, 2018

The continuous flow shot blast machines belongs to a high-speed projectile that is thrown by means of a shot blaster, thereby realizing the casting equipment that cleans or strengthens the surface of the work piece. The continuous flow shot blast machines can sand, remove and clean the casting at the same time. Compared with other surface treatment technologies, it has the advantages of faster and more effective, and it can be partly retained or stamped after the casting process.

 

Simultaneous use of continuous flow shot blast machines can also be used to remove burrs, as well as rust, etc., and the device can also remove surface contaminants for a partially coated surface and provide an increased adhesion surface profile of the coating to achieve reinforcement. The purpose of the work piece.

 

Continuous flow shot blast machines can be divided into the following four major components:

1. The blaster mainly uses the high-speed rotating impeller to project the projectile in a certain direction under the action of high centrifugal force. During the working process, some blasters can swing or move up and down at a certain angle.

2. Projectile collection, separation and transportation systems.

3. The carrier that continuously runs and flips the casting during the shot blasting process.

4, dust removal system.

http://www.wxblastmachine.com/








Copyright © Wuxi Think Machinery Co.,Ltd All Rights Reserved.Tel: +86-510-83579956