Exhibition

Home > Exhibition > Content
Trial operation of double hook type shot blasting machine
Jul 30, 2018

The size of the double hook type shot blasting machine is limited to the extent of the transportation conditions. It cannot be installed at the factory. Therefore, it needs to be transported to the user's site for installation when it is operated. The user should install it at the site. Shaping, and pay attention to the technical requirements in the figure.

The double hook type shot blasting machine needs to pre-clean its foundation before drying, so that it can be assembled. When the final assembly is completed, the cleaning room needs to be fixed first, then the blasting machine, track and hook are lifted. Machine, screw conveyor.

The double hook type shot blasting machine needs to adjust the directional sleeve in the blasting machine. When the directional sleeve is loosened, the directional sleeve can be rotated back and forth to change the position of the directional sleeve window to change the ejection position of the projectile, that is, The directional sleeve is adjusted in the direction of rotation of the blasting machine, and the ejection position is moved forward. Otherwise, the ejection position is moved backward.

When the hoist belt of the double hook type shot blasting machine is slack, the bolts on the upper part of the hoist can be adjusted during operation, so that the belt can be tightly tightened and the upper chain can be tightened. Adjusted by the tensioning device and the long holes in the bottom.

After the parts of the double hook type shot blasting machine reach the requirements of use, the whole machine can be used for dry running and load test operation. After the separator, hoist and screw conveyor are started, the required projectiles are taken from the first. The conveyor shell is gradually added, and it is transported to the storage bucket of the separator. The operation procedure of the machine is tested. During the operation, if abnormality is found, it should be stopped, and then retested after trial and repair. .

http://www.wxblastmachine.com/








Copyright © Wuxi Think Machinery Co.,Ltd All Rights Reserved.Tel: +86-510-83579956