Steel belt tumble type shot blasting machine

In this Belt Shot Blasting Machines, workpiece which need to shot blasting can placed on a circulation conveyor belt loosely. The conveyor belt can form a hollow, upside down the piece,make its surface exposure to the shot blasting. Because of combination used the trolley and workpiece rolling technology, the shot and remove the core work became very simple
Product description

working principle of tumble type Shot Blasting Machines

In this Belt Shot Blasting Machines, workpiece which need to shot blasting can placed on a circulation conveyor belt loosely.

The conveyor belt can form a hollow, upside down the piece,make its surface exposure to the shot blasting.

Because of combination used the trolley and workpiece rolling technology, the shot and remove the core work became very simple.

Pack material through a front hydraulic baeckereimaschinen operates, and unloaded through the reverse direction of rotation belt automatically.

Equipped with a durable type machine used to load material, this outfit feeding machine is suitable for the mention of the standard size container.

Position in the machine and decorated with between machine set aside a gap, gap size can make with empty boxes for feeding machine is suitable for loading or filed after the treatment of workpiece transfer machine.

on the roof of the machine fixed a impeller, so as to form the efficient, even abrasive flow

Blast the inner surface of the area the anti-wear material used to protect.

Therefore, maintenance cost is very low.

From the impeller in jet out of the steel shot in the dust removal and other pollutants, will collect and circulate afresh to store in a pill.

In addition also equipped with separation device, according to the nature of work of the machine to effective screening out the metal sand.

This machine can be connected directly to the exhaust fan or filter device, so that to steel shot cleaning, reduce work of dust and impurities mix.

Crawler shot blasting machine main technical parameters

Internal size: diameter ×   width mm Ф 600 x 900
Maximum allowable load   kg 200
The largest one-piece   weight kg 
Drive   power kw                           11
Diameter   of the impeller is mm       Ф 360
Shot   blasting speed m/s                   72
Hoist   kw                                       0.75
Tracked   drive kw                       1.5
Vibration motor kw                      0.2 * 2
Hydraulic motor kw                        2.2
Air capacity m ³. / h                  1000
The static pressure mm.  H2O              200
Dust removal motor power   Kw 2.2   (settlement type dust removal + electronic pulse dust removal)
Filtered   does not include any oil content of dry compressed air pressure Mpa 580
Air consumption Nm ³ / h                  4
Steel shot inputs kg                          200
Ac three-phase                              220 V 60 Hz
Control power                              220 V 60 Hz
The   total power equipment about           19 kw

Wuxi Think Machinery co.,ltd

Mob: 0086-13918693047

Tel: 0086-510-83579956

Fax: 0086-510-83507297

Add:N0.19  Wanshou road,Qianzhou industrial zone,Huishan district,Wuxi city.

Email: service@shyurong.net

Website: http://www.wxblastmachine.com

 

Related Products
Feedback

Copyright © Wuxi Think Machinery Co.,Ltd All Rights Reserved.Tel: +86-510-83579956