Home > Exhibition > Content
Dry running debugging steps of concrete crawler shot blasting machine
Sep 21, 2018

The concrete crawler type shot blasting machine is a high-strength wear-resistant rubber track or manganese steel track loaded workpiece. Generally, the high-speed rotary impeller is used to throw the projectile onto the workpiece in the chamber body to achieve the purpose of cleaning. It is suitable for a wide range of applications, such as sand cleaning, descaling, descaling and surface strengthening of small castings, forgings, stampings, gears, springs, etc. It is especially suitable for the cleaning and strengthening of parts that are afraid of collision.


The concrete crawler type shot blasting machine is a kind of cleaning equipment with good cleaning effect, compact structure and low noise. Before the test, the equipment must be familiar with the relevant regulations in the specification of the concrete crawler type shot blasting machine, the structure and performance of the equipment. Do a comprehensive understanding.


Concrete crawler shot blasting machine must check whether the fasteners are loose before starting and whether the lubrication condition of the machine meets the requirements; the assembly is required to be correct, and the single-action test should be carried out for each component and motor before starting; Should be correct, the hoist belt should be tight and not deflected. In addition, it is necessary to check whether the no-load current of each motor, the bearing temperature rise, the speed reducer, and the shot blasting amount are normal.http://www.wxblastmachine.com/

Copyright © Wuxi Think Machinery Co.,Ltd All Rights Reserved.Tel: +86-510-83579956