Exhibition

Home > Exhibition > Content
Operating requirements and points for attention of the tumbling rubber belt shot blasting machine
Oct 08, 2018

The tumbling rubber belt shot blasting machine needs to strictly perform its fixed-post training in the process of operation, and is familiar with the performance and characteristics of the machine to a certain extent. The operating procedures, use, and use of the tumbling rubber belt shot blasting machine Repair and maintenance.

  

The operator of the tumbling rubber belt shot blasting machine must check whether the various switches of the control cabinet are in the required position and then turn on the machine, so as to avoid malfunction, damage electrical and mechanical equipment, and cause equipment accidents. Non-operator operators are not allowed to operate or touch the electrical switch control area at will, and should not be near the working area of the machine to avoid accidents.

  

The operator of the tumbling rubber belt shot blasting machine must wear protective overalls, glasses, etc. When the operator starts up, pay special attention to the various types of instrument indicators. When all the indications of the instruments reach the normal value, the small crane (roller) can be operated. Work program. If it is found that the individual meter indicates a large error (not normal), immediately shut down. Check the device fault processing before it can start working normally.http://www.wxblastmachine.com/








Copyright © Wuxi Think Machinery Co.,Ltd All Rights Reserved.Tel: +86-510-83579956