Home > Exhibition > Content
Rubber belt shot blasting machine quality inspection focus
Nov 27, 2018

The rubber belt shot blasting machine is equipped with a very professional special rubber belt. Its various technical indicators are different from ordinary rubber belts, and the rubber content is required to be as high as 60% or more. Therefore, the quality of the rubber belt shot blasting machine must be checked. Touch the glue to judge the overall quality of the equipment.


The rubber belt shot blasting machine consists of three parts, the outer cover is covered with glue, and it is directly in contact with the workpiece to be cleaned, and it is hit by the steel shot, so the wear is severe, and it bears a great destructive force and impact force, and the life of the upper cover rubber It is almost the life of the track; the rubber is also exposed to the rubber at the same time, the quality can be seen and touched, the good rubber is elastic, the rubber is made by the mold in order to let the gas in the cavity discharge, the mold is The fine holes with exhaust will leave the exhaust line on the rubber, and the rubber will be felt by pulling the exhaust line by hand.


In the operation of the rubber belt shot blasting machine, in addition to checking whether its main function is normal, it is also necessary to understand the status of its dust removal configuration. For example, when the equipment is loaded and unloaded, it should be careful not to let the materials spill out. At the same time, it is necessary to spray foam on the easily polluted parts of the machine to remove dust, so that the light residual materials floating in the air can be covered in time. It is easy to clean; it can also be equipped with ventilation to quickly remove the dust.http://www.wxblastmachine.com/

Copyright © Wuxi Think Machinery Co.,Ltd All Rights Reserved.Tel: +86-510-83579956