Exhibition

Home > Exhibition > Content
Tumble Blast Shot Blasting Machine operation process and working procedure
Dec 04, 2018

In the process of carrying out the operation of the tumbling shot blasting machine, the equipment needs to strictly perform the fixed-station training, and is familiar with the performance and characteristics of the machine. For the operation procedures, use, and maintenance and maintenance of the instruction manual of the blasting machine, the operator must check whether the various switches of the control cabinet (panel) are in the required setting position (including each power switch) before starting the machine to avoid malfunction. Damage to electrical and mechanical equipment, resulting in equipment accidents.

The non-local operator of the tumbling shot blasting machine is not allowed to operate at will or touch the electrical switch control area. It should not be close to the working area of the machine during use, so as to avoid accidents, the operator must wear protective overalls. , glasses, etc.

When the operator of the tumbling shot blasting machine starts up, pay special attention to the various types of instrument indications on the panel. When all the indications of the instruments reach the normal value, the small crane (roller) can be operated to enter the working procedure. If it is found that the individual meter indicates a large error (not normal), immediately shut down. Check the device fault processing before it can start working normally.








Copyright © Wuxi Think Machinery Co.,Ltd All Rights Reserved.Tel: +86-510-83579956