Exhibition

Home > Exhibition > Content
The use method and main features of stainless steel centrifugal dryer
Dec 28, 2018

When operating the stainless steel centrifugal dryer, first check the power on condition and confirm that the drum is in the correct position. Then open the top cover and load the workpiece into the drum. Close the lid and activate the drum switch and the heat switch for dehydration drying. After dehydration and drying, first turn off the drum switch and the heat switch, then use the foot to brake the brake plate to stop the drum completely.

 

After confirming that the stainless steel centrifugal dryer has completely stopped, the worker can open the cover, take out the drum, and pour out the workpiece. The device is faster in drying operation, and usually evaporates 95%-98% of water in an instant, and the drying time takes only a few seconds, which is especially suitable for drying heat sensitive materials.

 

Moreover, the dried product obtained by using the stainless steel centrifugal dryer has good uniformity, high product purity and good quality. At the same time, for the operator, the entire production process is simplified and the operation control is convenient. The particle size, bulk density and moisture of the product can be adjusted within a certain range by changing the operating conditions, and the control and management are very convenient.








Copyright © Wuxi Think Machinery Co.,Ltd All Rights Reserved.Tel: +86-510-83579956