Home > Exhibition > Content
Tumble type Shot Blasting Machines operation and precautions
Nov 01, 2018

The Tumble type Shot Blasting Machines is mainly used for sand cleaning, descaling, descaling and surface strengthening treatment of castings and forgings weighing less than 15 kg. According to the operation requirements, the vehicle should be driven in the order of the dust collector - the throwing head - the hoist - the drum. The parking sequence is reversed, that is, the drum--lifter--head--duster.


It should be noted that in the process of processing different parts by using the Tumble type Shot Blasting Machines, the loading amount and specification of the parts do not exceed the prescribed amount, and the parts are prevented from being piled up at the impeller of the throwing head. As for the cleaning time of parts, it is determined according to the process requirements. Before starting the throwing head, the roller body door must be locked to prevent the iron pill from hurting people. During the operation of the equipment, it is necessary to pay attention to the smoothness of the throwing head. If the head is shaken, it should be notified to the maintenance personnel.


During the operation of the Tumble type Shot Blasting Machines, the user needs to combine the consumption of the iron pellets and timely replenish the new iron pellets. As for the castings that have not fallen sand, they should not be installed in the drum to avoid excessive sand accumulation, which will affect the separation of the iron pellets and the cleaning effect of the castings; it is strictly forbidden to open the door before the throwing head and the drum are not stopped.http://www.wxblastmachine.com/

Copyright © Wuxi Think Machinery Co.,Ltd All Rights Reserved.Tel: +86-510-83579956