Home > News > Content
Operating Procedures Of Shot Blasting Machine
May 10, 2018

1, operation of the equipment strictly enforce the fixed position, post training and post, familiar with the performance and characteristics of the machine.


2. Be familiar with the operation procedures, use, maintenance and maintenance of the blasting instructions.


3, the operator must check the control cabinet (panel) all kinds of switches in the required position (including the power switch) and then open the machine in order to avoid misoperation, damage electrical and mechanical equipment, and cause equipment accidents.


4. Non local operators are not allowed to operate or touch the electrical switch control area at random, and do not approach the working area of the machine to avoid accidents.


5, operators must wear protective clothing, glasses and so on.


6, the operator pays special attention to the various kinds of instrument instructions when the operator is open. When all the instruments are instructed to reach the normal value, the small crane (roller) can be operated into the working procedure. If there is a greater error in individual instrument indication, (abnormal) turn off immediately. Check the equipment fault before it can start normal operation.


7. During the operation of the equipment, the operator must inspect the equipment and check whether there is any abnormal noise or overheating. During the operation, it is found that the equipment is seriously damaged, that is, press the "emergency stop" button to stop and repair.


8, the operator must carry out routine maintenance and Zhou Baoyang (including lubrication) for this equipment according to "equipment management". Clean the dust and debris in the dust collector every week, so as not to affect the quality of dust removal and ensure the integrity of the equipment.


9, operators must be civilized in production and safety in production while strictly carrying out shift handover system.


10, the end of the work, immediately cut off the power switch, so that the device is in operation. And clean up the work site.

Copyright © Wuxi Think Machinery Co.,Ltd All Rights Reserved.Tel: +86-510-83579956